On this page
- Start with the joint and the kind of growth
- Choose a scraper for narrow joints and scattered weeds
- Check when a powered brush is worth buying
- Check what happens to sand, mortar and nearby surfaces
- Compare how the tool fits the whole job
- Work through a short path and a large drive
- Buy for the surface you’ll maintain regularly
Start with the joint and the kind of growth
Look under the first few weeds before buying a tool. A thin green line across much of the path is different from a few thick stems rooted in narrow gaps. A joint scraper gives you control over an individual weed. A powered joint brush is useful to compare when there’s a larger area of surface growth and the brush suits the paving and joint. Decide how much of the work you do repeatedly and where it takes the most time.
Look at the paving too. Block paving with sand between the blocks needs a different approach from stone laid with firm mortar joints. There may also be a surface coating or areas with loose edges. Identify the material and the joint type from the installation paperwork or supplier’s guidance. Work around delicate or damaged spots before treating a whole area with a more aggressive head.
Choose a scraper for narrow joints and scattered weeds
A long-handled scraper or patio knife can suit a short path with occasional weeds. Compare the thickness and shape of the blade with the gap without forcing a piece into the joint. Check whether you can hold it comfortably in the stance you’ll use. A longer handle can reduce the amount of bending, while a small hand tool can help where you need more control around a threshold or edge.
If the plant has a deep root and the gap is too small to lift it, the RHS explains that repeated removal of top growth can help weaken some weeds. Decide how much of the job actually needs a narrow tool. You may want to keep the short path clear and leave low growth in a corner where it causes no practical problem. For a small number of gaps, an occasional pass with a tool you can already use comfortably can be enough.
| What you need to clear | Start with | Check first |
|---|---|---|
| A few weeds in narrow joints | Hand scraper | Tip width, handle and edge condition |
| Long rows of shallow growth | Suitable powered joint brush | Head type and paving approval |
| Older or repaired paving | Careful local clean or repair advice | Loose blocks, crumbling mortar and coatings |
| General dirt across suitable paving | Surface cleaning method | Surface maker’s instructions and runoff |
Check when a powered brush is worth buying
A powered joint tool is worth considering for a long run of shallow weeds or moss where you can guide the machine along the gaps. Check how it follows a line and whether the head suits the width of the joint. On a pattern with frequent bends or staggered blocks, picture how many times you’ll stop and reposition it. At a kerb or a corner, a narrow scraper may still be the easier tool to use.
Read the head specifications carefully. A narrow joint brush and a wide surface brush are made for different jobs. Some manufacturers offer steel and nylon heads for different surfaces. Choose only a brush type approved for both the machine and the paving, and check the instructions for coatings or softer materials. The easiest comparison is to take a photo and measurement of the joint and ask the seller which specific head suits it.
Check what happens to sand, mortar and nearby surfaces
If a brush lifts sand out of the joints, look up the paving supplier’s advice for what to do next. Sweeping a joint clean may be only one part of the job. Put any re-sanding the supplier specifies on your plan. A hard scraper can also damage an edge if it’s forced, so check how much control you have before deciding how to treat a worn border or repaired section.
For a fragile finish, use the least aggressive method the manufacturer allows and start in an unobtrusive area where the instructions permit it. If joints are crumbling or blocks move, find out what needs repair before clearing the length of the drive. Our pressure washer guide compares cleaning equipment when the actual job is general dirt on a suitable hard surface. For cleaning adjacent decking, check the composite decking guide separately.
Compare how the tool fits the whole job
For a hand tool, check grip, handle length and whether replacement tips or brush heads are available. For a cordless machine, check working weight with the pack fitted and the amount of work you can reasonably do between charges. Confirm the model and brush codes before buying. Our garden tool spares guide explains how to check the right head, and the battery guide helps you price compatible power.
A corded brush needs a suitable supply and a route for the lead that you can manage while moving along the joints. Follow the model manual and outdoor electrical guidance. Look at the guard and the protective equipment required, and keep people and pets away from material the machine could throw. Include the time to sweep up and the walk to store the tool. A powered machine is useful when the work it saves is more than the effort it adds.
If you expect to regularly clean two surfaces, identify whether they need different brush materials. Check how to tell the approved heads apart and where replacements are sold. It helps to save the part reference with a photo of the paving, especially if a later kit has a similar model name.
Work through a short path and a large drive
Suppose a ten-metre path has a few weeds by a wall and a long stretch that’s already clear. Start with a patio scraper or a hand joint brush for those spots. Look at the widest and narrowest gaps and choose a tool whose tip fits the ones you need to clear. A long handle can make more of a difference to how the task feels than extra power.
On a large driveway with repeated shallow growth in the paving joints, a powered joint brush could save time if the paving suits it. Compare the head price and working weight and decide whether you’ll need a separate hand tool for edges. Work through a small area with an allowed method before investing in a complete kit. When loose leaves are obscuring the joints, start by dealing with the debris using our wet leaves guide.
Buy for the surface you’ll maintain regularly
Measure one typical joint and one awkward one. Note the surface covering, joint material and how much growth you usually deal with. If you can’t confirm a machine or head suits the paving, ask the maker of the surface or tool. Then compare what comes in the kit, how you’ll get replacement heads and where you’ll store it. Those details turn a vague choice into a tool you can use on a normal day.
If the job amounts to a few scattered weeds, a comfortable scraper may be the tool you reach for most often. If the same larger area needs regular attention, check that a powered brush matches the surface and handle the edges separately. Plan what to do with loose debris and any joints that need attention afterwards.