On this page
  1. Decide what you want the mower to do by itself
  2. Measure the route that is actually available
  3. Check how it crosses a path or driveway
  4. Compare wired zones and wire-free transport routes
  5. Work out what a fully separate lawn will cost in time
  6. Choose the charging site and check the complete setup
  7. Test the idea with two examples

Decide what you want the mower to do by itself

One robot mower can work across two lawns in some gardens. The first question is whether you want it to travel to both lawns and get back to its charging station on its own. A model that can cut a second area after you take it there may be perfectly useful, but that arrangement is different from setting a schedule for the whole garden. Decide which of those jobs you expect before comparing models.

Draw the route from the proposed charging position to each lawn. Mark the gates, paving, gravel, changes in level and narrow points. A continuous stretch of grass through an open side return is one layout. A route across even paving may suit a model with a compatible transport path. Steps or a closed gate create a different job. Put the problem you need to solve on the sketch so it’s the first thing you ask about.

Measure the route that is actually available

Measure the narrowest usable width along the whole route and the space the mower has to turn. Include the position of posts, pots, pipes and the gate when it’s open. Check whether tyres, edging and raised borders take up part of that width. A mower’s overall size tells you whether the body might pass through. The model’s installation requirements tell you how much room it needs to navigate and keep the required clearance from boundaries.

Read the passage specification for the exact model and navigation system. Some instructions refer to distance between installed boundary wires, which can differ from the width between walls. Also look for limits on length, slope and the shape of the entrance and exit. If your string of measurements only just meets a listed figure, show the installer the narrow point and how the mower would turn there. Our small-garden mower guide has a useful approach to measuring usable access.

Decide how the mower would reach each lawn
LayoutOption to compareCheck before paying
Connected grass passageAutomatic travel to both lawnsWidth, turns and clearances
Lawns linked by pavingModel-supported connecting routeSurface, slope, people and vehicles
Completely separate lawnsSecondary area or a separate toolMoving, starting and charging routine
Route through a gateAccess plan compatible with the modelUsual gate position during mowing

Check how it crosses a path or driveway

A path can connect two lawns if the model supports that route, the surface allows it to travel and the setup keeps people and vehicles clear. Compare the slope, joints, kerbs and changes in height with the manufacturer’s installation guidance. Check whether the mower would have to cross while a car is parked there, a gate is shut or deliveries are coming through. A route that’s clear during installation needs to stay practical on the days the mower runs.

For a shared driveway or access route, start by considering how other people use it and whether there’s a separate route you control. Keep the mower inside the area where it can operate as the manual directs. A public pavement is a reason to choose a setup that keeps the grass areas separate. If the route depends on someone moving an object or opening a gate each time, include that task in the comparison before paying for automatic travel.

Compare wired zones and wire-free transport routes

With a wired installation, find out how the boundary layout and any guide wire work for a connected passage. Some makers document a secondary area that sits inside the system but can only be used after you move the mower there. Read the diagram for the model you’re considering so you know when the mower will return to the station and what needs you to intervene.

With wire-free models, check how separate work areas, connecting routes and exclusions are set up. Ask about the navigation technology the model actually uses. A house wall, tall hedge or covered route can matter for some systems, especially when the mower needs an adequate satellite view. Other systems have their own conditions for using cameras, sensors or a reference station. Read the maker’s advice for the tightest part of your route and ask for a site assessment if the answer hinges on it.

Work out what a fully separate lawn will cost in time

For a front lawn divided from the back by steps or a locked gate, a secondary mode can be an option. Check the model’s instructions for how to move it safely, start it in the separate area and get it back to charge. Husqvarna’s wire-free secondary area guidance, for example, explains why a mower without a connecting route cannot find the station from that area. Other brands and models can handle the same layout in different ways.

Picture the whole routine in a typical week. You may need to take the mower out, set it to work, retrieve it and put it back onto the station as directed. Check the weight and route, including any steps, and consider who will do those jobs. If the front lawn is tiny, a compact manual or cordless mower may be an easier way to look after that area while the robot handles the back.

Choose the charging site and check the complete setup

Read the station instructions before you choose where it will go. Check access to a suitable power supply, docking room and the conditions for a signal or reference unit where relevant. Learn whether the quoted area and working time suit your combined grass area and layout. The area on the box can guide a comparison, but you also need a setup that lets the machine reach the grass and return to charge within the way you’ll use it.

Ask what is included and what the layout adds. Installation equipment, cable or extra components can affect the price. For a front lawn visible from the street, check the model’s security options and how you will store it. Add the timing you’ll use to the plan, including checking the grass for wildlife and scheduling cuts in daylight and following the instructions on people, pets and mowing conditions. Our wet-lawn guide helps you judge when the ground is ready for any cut.

Test the idea with two examples

For a back lawn and a smaller front lawn with a wide, level connection, ask the supplier to confirm the route, slope and docking arrangement for the model you’re considering. If it can travel both ways with the gates in the positions you actually use, compare it with other models that suit that layout. Give the route and the charge point the same attention as the two areas of grass.

For two lawns separated by steps and a gate you keep shut, plan around manual movement or a separate tool for the smaller lawn. Compare how many trips you’d make against how long the small patch takes to mow now. Bring your drawing and dimensions to the seller or installer and ask for confirmation of what you’ll do yourself. Browse the lawnmower buying checklist for the rest of the shortlist.