On this page
  1. Sort the pile before you look at models
  2. Understand how the two mechanisms fit different jobs
  3. Read the branch capacity with the pile next to you
  4. Compare noise, feed, size and the collection box
  5. Plan the working area and outlet
  6. Run the numbers for ownership versus hire
  7. Choose for a normal cut rather than the biggest pile

Sort the pile before you look at models

A pile from a hedge can contain leafy tips, flexible shoots and firm pieces of old wood. Take a look at what makes up most of the volume. If an annual tidy mostly leaves soft green trimmings, you may have a few bags of material you can deal with easily. If you regularly cut back several woody shrubs and have somewhere to use the chips, a shredder may solve a clearer problem.

Make a quick list of the plants you cut and what the waste looks like after a normal tidy. Separate the unusual, thick branches from the usual material. Compare a machine against that normal pile, because the biggest piece can send you shopping for a tool you rarely need. The hedge trimmer guide explains why the type of growth matters when choosing the main cutting tool too.

Understand how the two mechanisms fit different jobs

An impact or blade shredder uses a rotating blade system. It can be a useful starting point for a small mixed pile or lighter hedge trimmings if the manufacturer lists them. Look at what the manufacturer allows as much as the cutting mechanism. Long soft stems and bundles can behave differently from a few firm twigs, and individual models have different limits on the material they handle.

A roller or crushing shredder draws suitable material through its mechanism and is often marketed for woody branches. Some manufacturers also offer designs intended to cover a wider mix of cuttings. Look for evidence that the exact model can take your usual material. For example, Bosch describes separate blade, roller and turbine choices for different kinds of garden waste, which is a useful reminder to compare the machine and the feedstock together.

Start with the cuttings you normally produce
Typical jobOption to compareDecision check
Light leafy hedge trimmingsBlade unit suitable for the materialWill you gain enough over your current collection routine?
Regular woody pruningsRoller unit suited to the woodExact limit, typical diameter and output
A mixed pile every seasonModel specified for the mixWhat material has to be dealt with separately?
Occasional heavy renovationSuitable hire or a serviceAccess, handling and where the chips go

Read the branch capacity with the pile next to you

Look up the rated cutting capacity for the model before you buy. Compare it with the typical branch diameter on a few cuttings. Take into account what the manufacturer says about the type and condition of wood. A headline maximum doesn’t tell you how well a machine will handle every forked shape, mixed branch or soft trimming you give it. Use the machine’s operating guidance when deciding how to prepare material and stay within the stated limits.

If only a few pieces are beyond the model’s capacity, decide how you’ll handle them separately. A one-off renovation may be easier with a suitable hire machine or a garden waste collection arrangement. For regular small prunings, look at how the machine handles the trim you have most often. Set aside any waste the maker excludes, and check RHS disposal advice if plants are affected by a disease or a problem that makes the material unsuitable for ordinary composting.

Compare noise, feed, size and the collection box

Check comparable noise figures and the operating instructions for the exact machines. A low-noise description can help you shortlist but won’t tell you how often you can conveniently run one in a small garden. If there are close neighbours, picture where the machine will stand, how long the job will take and when you can do it. Use the protective equipment and working distances set out by the maker.

Look at how you’ll feed an approved piece of material and empty the box when it gets heavy. A box that slides out easily can matter more than the volume on the label. Measure wheels, handle and height for the route into storage, and check whether the machine can be stored as you intend. If there’s a step at the shed door, compare working weight and carrying points with a model you can comfortably move. Count the collection box and any separate storage pieces when taking measurements.

Look at how the maker describes emptying and moving the collection box while the machine is isolated. If your normal destination is uphill or through a door, compare a manageable load with a larger advertised capacity. You may find that several lighter trips suit you better than carrying a large full box.

Plan the working area and outlet

Arrange the job so there’s a stable place to put the machine, suitable power and a clear approach. Check the manual for outdoor power and the manufacturer’s advice on handling obstructions. Stop and isolate the machine as directed before dealing with a blockage. What you want from a buying comparison is a setup suited to your pile and the space you have, with instructions you can follow comfortably.

Pay attention to what will come out. If you want to make a useful mulch from woody prunings or mix the material into a composting routine, check RHS guidance on how to use shreddings. A machine may turn bulky waste into a material you still need to handle. If you have no place to use or keep it, compare your council’s accepted garden waste options and the time they take. The wet-leaves guide shows the same useful principle for lighter waste. Decide where it will go before you buy the tool.

Run the numbers for ownership versus hire

For a big cut once a year, compare the cost and effort of hire, using a service and buying your own model. Include getting the machine to your garden, storing it between jobs, repairs and any approved replacement parts. If you work little and often and can use the shredded material, ownership may be easier to justify. If the kit will sit unused for most of the year, the cost and storage may be hard to justify.

Look at the price of the exact machine and any fittings included. Check access before ordering a heavy tool you’ll have to move through a tight gate. If a blade or another part needs occasional replacement, identify the exact product number and how the manufacturer supports it. Our guide to garden tool spare parts gives you a routine for checking the listing and the manufacturer’s approved part.

Choose for a normal cut rather than the biggest pile

Say you have a short hedge that produces plenty of leaves but only a few firm stems. Start by checking whether a garden waste service, composting where suitable or a hand tool already covers most of the year. If you have several woody hedges and you frequently want chips for paths or beds, look at a roller model intended for the wood you cut. Make sure the supplied collector makes the trip to your destination manageable.

Write down your usual material, access width and where you want the output to go. Ask the seller or hire company to confirm the specified material and capacity. Do that before treating engine power or a large box as the deciding feature. Choose around a job you can repeat regularly in the space you actually have.